EXTREME SWITCH
A Plug & Play addition to improve the network connection to the Extreme Music Server and Olympus Music Server
Managing noise levels is crucial for optimal sound quality from a Music Server

Functionality
Housed in a beautiful 22 x 22 x 5 cm / 9 x 9 x 2 inch single-piece solid copper chassis, the Extreme Switch is an external network device intended to replace and optimize the direct ethernet interface to the Extreme Music Server. The Extreme Switch reduces noise by cleaning the network and offloading processing from the music server. This results in a significant increase in the sound quality of local and streaming music.
Works Standalone and in combination with the Extreme Router.
The Extreme Switch provides an easy solution to improve sound quality by reducing the noise coming into a Music Server. The Extreme Router is a more advanced solution that achieves a more significant improvement, due to its multi-pronged approach. Use the Extreme Switch together with the Extreme Router to achieve the ultimate in natural, effortlessly liquid, free-flowing, and organic music playback.
Connectivity
The Extreme Switch is easy to connect with one SFP+ input module slot and one SFP+ output module slot that both can be fitted with a range of options.
- The input SFP+ slot can be fitted with either an RJ-45 connector module or a Fiber connector module.
- The output SFP+ slot can be fitted with either an RJ-45 connector module, a Fiber connector module, or a DAC Cable in a variety of lengths ranging from 0,5 – 7m.
Power
The Switch is powered by any normal 12-19V DC power supply. A standard wall-wart power supply is included. Power Connector Dimensions: 2.5mm inner / 5.5mm outer / 11.3mm length (14mm recommended).
Add the Extreme DC Power Distributor
Add the Extreme DC Power Distributor (DCD in short) to further improve the sound. The DCD allows powering both the Extreme Switch and Extreme Router from the same power supply while offering improved performance compared to using two separate power supplies, especially when using a DAC cable to connect the Extreme Router to the Extreme Switch.
The Switch’s performance will be even further improved by using a higher-end power supply than the supplied wall-wart, and the ultimate solution would be to use a high end power supply in combination with the DCD.


Features
- Chassis machined from a solid block of copper.
- Plug & Play: requires no configuration.
- Reduces noise by cleaning the network and offloading (moving) processing from the music server.
- Easy to connect with one SFP+ input module slot and one SFP+ output module slot that both can be fitted with a range of options.
- Ground terminal: M6, with hex 4mm screwdriver hole.
The Extreme Switch facilitates a Gigabit / 1000Mbps SFP input and output connections. It is not compatible with 100Mbps network components.
FINISH OPTIONS
BLACK
A smooth, satin black finish.
POLISHED CHROME
A lavish high-gloss chrome finish.
OPTIONAL EXTRAS
DAC Cable
For the Output, available in 0.5, 1, 2, 3, 5, or 7 meter length.
SFP Transceiver
RJ45 to SFP transceiver for input or output.
Fiber SFP transceiver for input or output.
DC POWER DISTRIBUTOR
See the DC Power Distributor page for more information.
Extreme Switch Dimensions
22 x 22 x 5 cm
9 x 9 x 2 inch
Extreme Switch Connectivity

Extreme Router and Extreme Switch Connectivity

Extreme Router and Extreme Switch Connectivity - with DCD

Documentation and Downloads
For all documentation, please go to our Downloads page via the link below

