Description
Extreme Switch
The new Taiko Audio Extreme Switch is an external network device intended to replace and optimize the direct ethernet interface to the Extreme. Milled from a solid block of copper.
The provided connectivity is one in and one out. To this end, the switch contains one SFP+ input module slot and one SFP+ output module slot that both can be fitted with a range of options.
The input SFP+ slot can be fitted with either an RJ-45 connector module or a Fiber connector module.
The output SFP+ slot can be fitted with either an RJ-45 connector module, a Fiber connector module, or a DAC Cable in a variety of lengths ranging from 0,5 – 7m.
Gigabit / 1000Mbps
The Taiko Extreme Switch facilitates a Gigabit / 1000Mbps SFP connection. It is not compatible with 100Mbps network components.
Specifications:
- Dimensions 21 x 21 x 6 cm / 8.27 x 8.27 x 2.36 inch
- Weight: 15,7 Kg / 34.61 lbs
- 2 SFP+ ports
- Standard 12VDC SMPS Power Supply included
- Power consumption 1.3 – 3.6w (around 100mA)
- Standard DC barrel polarity (middle pin positive +)
- 5.5 external / 2.5mm internal DC connector (11.3mm length)
- Input voltage range 12-19VDC (12V is optimal)
Extreme Network Card
The new Taiko Audio Extreme Network Card is a single-connection PCIe option board for the Extreme Server.
The Extreme Network Card is preferably installed in Slot 2, in place of the old SFP card. Power to the card is provided by a split DC cable that substitutes the single cable that powered the USB cable and will then power both the USB card and network card.
There is a single SFP+ module slot that can be fitted with either an RJ-45 connector module or a Fiber connector module.
Specifications:
Dimensions l x b x h cm
Weight: 0.8 Kg
1 SFP+ port
suitable for PCIe slot
Extreme Switch + Network Card (Bundle)
Includes:
Extreme Switch
Extreme Network Card
Power Supply
Free SPF+ module
Free SPF+ DAC Cable
Documentation and Downloads
For extra documentation and software, please go to the Downloads page: